Problems & fixes, Warface

This usually comes from Windows virtualization and core isolation settings blocking the driver. Try the following in order:

• Enable virtualization (VT-x/AMD-V) and Hyper-V in BIOS and Windows features;
• Turn off Windows sign-in with a PIN in sign-in options — it can prevent Hyper-V from being disabled properly;
• Add the loader folder to your antivirus exclusions and temporarily turn off real-time protection;
• Run the compatibility-check tool support provides and follow its prompts;
• Restart your PC after making changes and launch the loader again.

If the error persists, contact support with a screenshot — they'll walk you through the next steps for your specific system.

This usually comes from Windows virtualization and core isolation settings blocking the driver. Try the following in order:

• Enable virtualization (VT-x/AMD-V) and Hyper-V in BIOS and Windows features;
• Turn off Windows sign-in with a PIN in sign-in options — it can prevent Hyper-V from being disabled properly;
• Add the loader folder to your antivirus exclusions and temporarily turn off real-time protection;
• Run the compatibility-check tool support provides and follow its prompts;
• Restart your PC after making changes and launch the loader again.

If the error persists, contact support with a screenshot — they'll walk you through the next steps for your specific system.

Yes, that's expected: whenever the game gets an update, the software needs to catch up too, and its features can be unavailable in the meantime.

Check the product status on the site. If it already shows as active but the program still won't run, try re-downloading the loader — that sometimes fixes things right after a patch.

A driver error usually indicates a conflict with installed software or a system environment issue. Follow these steps:

• Download the Sordum utility (available from technical support; the archive password will be provided by support).
• Launch it, click Search, and wait for the scan to finish.
• Send a screenshot of the results to the support chat — the developer will analyse the conflict and provide a fix.

To fully disable Windows Defender, download the Sordum utility (available from technical support; archive password: sordum). Run it, click Search, wait for the scan to complete, and send a screenshot of the result to support. Once Defender is disabled, relaunch the loader.

If the console shows errors or the program closes immediately after launch, try the following steps:

• Disable Hyper-V: open CMD as Administrator and run bcdedit /set hypervisorlaunchtype off, then reboot.
• Make sure the cheat folder name matches exactly what is specified in the manual (e.g. aimbeast V2 , no extra characters or version suffixes). A folder name mismatch is a common cause of crashes.
• Install the latest DirectX and Visual C++ Redistributable runtimes (links are provided in the product instructions).

In most cases, using a VPN fixes the issue: start a VPN connection and then relaunch the loader. If your VPN has TUN mode enabled, disable it in the VPN settings and try again.

Additionally: download the Sordum utility (available from technical support; archive password: sordum), run it, click Search, and send a screenshot of the results to support — this helps diagnose what is blocking the launch.

If neither VPN nor Sordum (available from technical support) helps, contact support to escalate to the developer.

The archive password is: sordum.

If the loader throws an error and closes, follow these steps in order:

• Run the Sordum utility (available from technical support; password: sordum), click Search, and send a screenshot , this helps detect hidden antivirus or security services.
• Open Command Prompt as Administrator and run: DISM /Online /Cleanup-Image /RestoreHealth, then sfc /scannow , this repairs system files.
• Try launching with a VPN enabled.
• Make sure you are not using a permanent HWID spoofer , it corrupts system identifiers and can prevent the loader from working.

If none of these steps help, reinstall Windows and try again.

This is usually caused by a conflict with your antivirus or Windows built-in protection. Try the following:

• Add the loader's folder to your antivirus exclusions.
• Temporarily disable real-time protection (both in Windows Defender and in any third-party antivirus you have installed).
• Close overlays from other programs — voice chat apps, game launchers, GPU monitoring tools.

If the loader still won't start after that, contact support — they'll walk you through a compatibility diagnostic tool.

This is usually caused by a conflict with your antivirus or Windows built-in protection. Try the following:

• Add the loader's folder to your antivirus exclusions.
• Temporarily disable real-time protection (both in Windows Defender and in any third-party antivirus you have installed).
• Close overlays from other programs — voice chat apps, game launchers, GPU monitoring tools.

If the loader still won't start after that, contact support — they'll walk you through a compatibility diagnostic tool.

The loader is temporarily unavailable while the developer releases an update. This is a planned process that typically takes a few hours.

• Monitor the status on the website and in the news channel: t.me/procheatsupport
• Subscription time does not count down during a freeze — the timer is paused.
• Once the update is ready, the loader will work automatically. No additional steps are needed on your end.

Use a VPN to access the site and download the loader. Once the loader is downloaded and the cheat has been injected, you may disable the VPN — it does not need to remain connected during gameplay.

This error is usually caused by Windows Defender or a third-party antivirus interfering with the loader. Fully disable all antivirus protection before launching.

Also try connecting via VPN (NordVPN or similar paid service is recommended) as some ISPs may block the loader download. If VPN does not help, run the diagnostic tool (archive password sordum, click «Search») and send the screenshot to support.

This error is usually caused by Windows Defender or a third-party antivirus interfering with the loader. Fully disable all antivirus protection before launching.

Also try connecting via VPN (NordVPN or similar paid service is recommended) as some ISPs may block the loader download. If VPN does not help, run the diagnostic tool (archive password sordum, click «Search») and send the screenshot to support.

Make sure the game is running in windowed mode , the cheat menu cannot overlay a fullscreen game.

If the menu still does not appear, download the Sordum utility (available from technical support; archive password: sordum), launch it, and click Search. Once it finishes, take a screenshot of the result and send it to support for further diagnosis.

Most likely the cheat is currently undergoing a technical update. During this period downloading and launching are temporarily unavailable.

Please wait for the update to finish , it usually takes anywhere from a few hours to a couple of days. Once the new version is released, the product will become available again in your account.

If the browser blocks the download or the redirect does not trigger the file, contact support , an operator will send you a direct download link for the loader.

This happens right after a Warface update: the cheat temporarily stops working because the developer hasn't released a version compatible with the new game patch yet.

There's nothing to fix on your end — just wait for the official cheat update. Once it's out, all functions will work normally again.

This is not an error , it is an informational notification from the cheat indicating that your PC's hardware identifiers changed after running a spoofer. The cheat continues to work normally.

If you used a spoofer before launching, this message is expected. Simply dismiss the notification and continue playing.

This error means the app can't verify the certificate when reaching the activation server — usually caused by GitHub being blocked or unstable from your region.

Try connecting through a VPN and entering the key again — in most cases this clears the error.

After a major game update the software can stop working for a while: the loader may hang during launch, or nothing happens after starting, until the developer releases a version compatible with the new game build. Such products are usually marked unavailable on the site until a fix is out.

• Reinstall the loader and try launching again — this sometimes clears the hang.
• If that doesn't help, wait for the software to be updated for the new game version.
• Downtime caused by an update is usually compensated by extending your subscription — check with support about this.

Launch everything in a strict order: reboot your PC first, then start the loader, then the spoofer, and only after that the game.

If the game crashes or you close it, repeat the whole sequence starting with a reboot.

Yes, in some cases the loader has to be launched specifically from a USB flash drive as part of the protection mechanism.

Copy the loader file onto the flash drive and run it from there instead of a local disk.

If the menu is visible but features are not working in-game, try the following:

• Restart your computer and relaunch the cheat.
• Switch the game to windowed mode.
• Make sure all antivirus and security software is fully disabled and removed.

If the issue persists, record a video of the full launch process (from start to entering the game) and share the link (YouTube) with support so the developer can review it.

This is caused by non-default Windows display scaling. Go to Settings → System → Display and set the scale to 100%. Restart the neural net , the crosshair will align correctly.

This product does not have a traditional settings menu , it is a neural network that operates automatically without manual configuration. Controls are limited to the tray icon. Advanced options are available in the local web interface, accessible via the localhost address described in the product manual.

Currently only Silent Aim mode is available. Standard aimbot may be temporarily disabled after a game update , check the cheat status page in the store for the latest info.

The aimbot feature has been temporarily disabled by the developer and is currently being reworked , it was removed due to a high risk of anti-cheat detection. All other features (visuals, ESP, etc.) continue to work normally.

Watch for cheat updates , the aimbot will be re-added after the rework is complete.

If the interface opens but nothing actually activates in-game, check whether a third-party anti-cheat client (for example, Faceit) is running on your PC — it can block the cheat even outside of a match. Fully close or uninstall that software, then relaunch the cheat.

If the interface opens but nothing actually activates in-game, check whether a third-party anti-cheat client (for example, Faceit) is running on your PC — it can block the cheat even outside of a match. Fully close or uninstall that software, then relaunch the cheat.

This is a server-side issue, not a mistake on your part. Contact support and provide the key that arrived in your email after payment.

The operator forwards the key to the developer, who then issues a replacement. A new key usually arrives within a few hours depending on the developer's time zone.

No additional steps are required on your end while you wait — the loader and all files are already set up correctly.

Some loader versions use hardware-based protection and require a regular USB flash drive to be plugged in while the software is running — this confirms the binding to your device. If the loader used to work without a flash drive and now asks for one, that usually means a program update changed this requirement.

• Check the current instructions that came with your purchase — they specify whether a flash drive is needed for your particular version.
• An actual physical USB flash drive is required — emulated or virtual drives will not work.
• Some versions run directly from the flash drive: launch the loader straight from it and follow the on-screen prompts, no installation on your PC or in the game folder is needed.

This happens when an earlier, now-expired key was already activated: the software keeps remembering that old activation even if you delete and reinstall the program itself — reinstalling alone usually doesn't fix it, since activation data is stored separately.

Contact support with your new key — the operator can reset the old activation on their end or tell you which local file needs to be removed so the new key can be entered.

The key binding resets when you reinstall the OS. Contact support and provide your activation key — the operator will forward the request to the developer, who will reset the HWID on the server side. Re-enter the key in the loader after the reset is confirmed.

Note: one key works on one PC only. If your hardware has not changed, the reset is free of charge.

If the old key has expired but after buying a new one the app immediately shows the same expiration error and won't let you enter it — the old license got cached locally. Simply deleting or re-downloading the loader won't fix this.

• Delete the license file from the neural net's folder, if one is there.
• Clear the local NVIDIA driver cache (the DirectX cache folder inside your AppData folder), then empty the recycle bin.
• Relaunch the neural net and enter the new key.

If that doesn't help, contact support with your order number.

The CourierScript license key is bound to a single computer (1 key = 1 PC). Transferring the key to a different device is not supported.

If you are reinstalling Windows on the same computer, an HWID reset is not required , the binding is preserved. If you are changing hardware or switching to a different PC, contact support to discuss your options.

This usually happens when leftover activation files from a previous key or installation are still on your PC — they make the system treat the new key as already used.

Contact support: they can tell you which activation file to remove before entering the key again, or advise reinstalling the program via the official loader.

The key is bound to a single device (one key = one computer), and there's no automatic transfer.

To move activation to a new PC, contact support and explain the situation — they may ask you to confirm the device change before resetting the binding manually.

Yes, activation requires a physical USB flash drive — it's used on first launch to bind the license. You don't need to disable virtualization or Hyper-V in BIOS for this; those steps are only needed for certain launch errors, not for activation itself.

Yes, activation requires a physical USB flash drive — it's used on first launch to bind the license. You don't need to disable virtualization or Hyper-V in BIOS for this; those steps are only needed for certain launch errors, not for activation itself.

This means your computer can't reach the activation server — usually because of an ISP block or regional restriction, not a problem with the key itself.

Turn on a VPN and try activating again.

The «Payment pending» status updates once the payment provider confirms the transaction. This usually takes a few minutes. Wait 5,10 minutes and refresh the page , access will be activated automatically.

If you were charged more than once (for example, first by card and then by delayed SBP transactions), contact the seller chat directly on the store page. Describe the situation and attach screenshots or transaction IDs , duplicate payments will be refunded.

RTX 50-series cards (5060, 5060 Ti, 5070, and others) aren't yet supported by the current build of the neural net — on launch the loader throws a CUDA architecture (sm_120) compatibility error against the installed PyTorch version.

This is a limitation of the software itself, not your system setup: reinstalling your GPU drivers or re-downloading the loader won't fix it. Contact support with your card model — they can confirm the current support status or suggest an alternative.

This error means the current build doesn't yet support the architecture of the newest graphics cards (RTX 50 series and up). It's not a defective copy — the developer just needs time to update the software for the new generation of cards.

• Contact support to check whether an updated build is already available.
• If not yet, running the software on another PC with an older card is a workaround in the meantime.
• Rolling your graphics driver back to an earlier version sometimes clears the error too.

This product supports Nvidia GPUs only. AMD graphics cards (RX series and others) are not compatible , the neural net will not function correctly. If you have an AMD GPU, contact the seller's chat to request a refund.

The software is built for NVIDIA graphics cards — AMD and Intel cards aren't supported, and trying to install the program's driver on them can seriously slow down your whole PC. Older or low-end NVIDIA cards (GTX 750 Ti, GTX 1060 class) also aren't powerful enough to handle the detection workload.

Before buying, check with support whether your specific graphics card is powerful enough for the current version.

Enable virtualization directly in BIOS/UEFI , the Windows Task Manager entry only reflects the current state and may not appear if the feature is disabled at the BIOS level.

After enabling it, reboot and launch the loader again. Send a screenshot of the loader screen to support so they can confirm all parameters are correct.

Enable virtualization directly in BIOS/UEFI , the Windows Task Manager entry only reflects the current state and may not appear if the feature is disabled at the BIOS level.

After enabling it, reboot and launch the loader again. Send a screenshot of the loader screen to support so they can confirm all parameters are correct.

CourierScript supports Windows 10 (all builds) and Windows 11 versions 21H2, 22H2, and 23H2. Windows 11 24H2 is not supported and there is no workaround , you will need to install a compatible version of Windows.

The current compatibility list is always listed on the product page.

The neural net requires a sufficiently powerful Nvidia GPU. Cards at the GTX 1050 Ti level or below typically cannot provide the required performance , the neural net FPS drops to 10 or lower, and the aim fails to track targets. Before purchasing, ensure your GPU is GTX 1660 or higher (or any RTX card).

If the loader displays a conflict error on startup, enter BIOS and disable virtualization (Virtualization Technology / VT-x / AMD-V). Then relaunch the loader.

Additionally, disable UAC (User Account Control) in Windows settings , this can also interfere with injection.

Check your Windows version: press Win+R, type winver and press Enter. Send the version and build number to support , this helps diagnose compatibility issues.

The product requirements list specific supported Windows builds. If you updated your system to a build that isn't on that list yet, compatibility can temporarily break.

Check the current list of supported builds on the product page and reach out to support if you need more help.

No, a DMA card isn't required — the neural net launches and runs on a regular PC without extra hardware.

A DMA setup (a capture card plus a second PC) can be added on top for extra stealth, but that's a separate optional configuration, not a requirement to launch or use it.

If the site won't load or activation hangs, your internet provider is most likely blocking access. Turn on a VPN and try again — in most cases that's enough to get things working.

If the site won't load or activation hangs, your internet provider is most likely blocking access. Turn on a VPN and try again — in most cases that's enough to get things working.